NEW VERSION AVAILABLE: GET YOUR GT2 TOMAHAWK TODAY. CLICK HERE!
- Max load capacity; 50 lbs
- Mounts to Arca-type Clamp
- Versatile 90-degree mounting plate
- Mounts via 1/4"-20 foot threads
- Stainless steel sealed bearings
- Smooth, stable movement for long telephoto lenses
- Made of T6061 Aluminum
- Lightweight and Durable
- Made in the USA
- 5-year Warranty
ProMediaGear GT1 Tomahawk Gimbal Attachment for Ball Heads Overview
The ProMediaGear GT1 Tomahawk Gimbal Attachment is an affordable solution if you do not need a separate gimbal head. It attaches to a regular ball head and you have a gimbal when needed.
The Tomahawk mounts to any Arca-type clamp ball head. Once done, it provides a smooth panning movement with tilt and swing.
Weight limit is not a huge concern too as it has a max load capacity of up to 25 lbs. But is just a conservative number. It can accommodate more weight depending on the ball head.
It is also rugged and durable - all thanks to the solid T6061 aircraft-grade aluminum construction. To top it off, it has an anodized scratch-resistant finish.
If you do not have a tripod, it attaches to a monopod too via the standard mount at the bottom.
What makes it different to the GKJr Katana Pro and the GK Katana Gimbals?
In terms of functionality, it works the same. But the GT1 Tomahawk is not a stand-alone gimbal. It needs a ball head to work.
The GT1 Tomahawk is a great alternative to a dedicated gimbal head. It is lightweight, easy to carry, and works smoothly when shooting. Get yours today!
- Length: 5.25 inches
- Width: 2.25 inches
- Height: 8 inches (9.7 inches with knob)
- Weight: 2.08 lbs
- Load Capacity: 25 lbs
- Mount: 1/4"-20 Thread and Arca compatible on the bottom and side
- Works with ball heads and monopods
- Compatible with QR plates from other manufacturers
- T6061 Aluminum construction
- Black-anodized finish
- 5-year warranty
- Lens/Camera mounting plate required
- For lenses use the PBX3, PX4, PX6, or PX8 lens mounts
- For cameras: use an L-Bracket
This was my first investment in a Gimbal head and I have had it for a while. I have used it on a ball head and on a panning head. You can see the set up in one of the attached photos. It shows it with a Sigma 500mm f/4 with a 1.4X TC on a Nikon D850 body. I absolutely love it. Stable, agile, strong, trustworthy. It has also been used with a Nikon 300mm f/2.8 with or without a 2X TC. I have been so impressed that I have now invested in the Katana Jr. I have just received it, so it will be tested this weekend. The photographs below are from my monitor screen (some unprocessed) of some recent and past uses of the Tomahawk with both lenses. By the way, the woodpecker is shot on a Nikon F6 film camera and then scanned.
There is many awesome reviews already posted here ... so I will make mine short and sweet. I enjoy shooting auto racing and wildlife. After reading the reviews here, I thought the Tomahawk would be perfect for my needs. I can tell you ProMediaGear knocked it out of the park. It works fantastic. The detail and machining is extremely is very good. setup was fast. I was able to balance it and set the right amount of tension. I live close (30 miles) from where American Bald Eagles live and nest. The Tomahawk is going to make shooting them this time a lot more easy. I would give it 5 Stars Plus. I highly recommend it !!
s is a fantastic piece of gear that has revolutionised my imaging, It moves quickly and seamlessly between my Kirk tripod head and Manfrotto monopod as required, I shoot lots of coastal birds so switching support depending on rocky/sandy shore and whether I'm using a hide is very important. It is very easy to balance and adjust the gimbal friction - and at a fraction of the price of a full gimbal head. This shot taken with it on tripod @850mm optical. D500
I did not want to change heads when I was going to shoot with the 200-600 Sony and this does the trick. Smooth and stable. Super build quality as well. Picture attached shot at 780mm on A7rii.
I think this might just be the best travel gimbal made. While I love my PMG Katana Jr, sometimes it's a bit too large to carry in my already full camera pack. Enter the PMG Tomahawk addon gimbal. It's small enough to tuck in my pack, yet as solid as a full size gimbal. I use this in conjunction with my PMG BH50 and BH1 ball heads and they pair very well. Although it lacks the vertical adjustment of a full gimbal, I find that it balances very well with my gripped D850/D500 and 200-500mm Nikkor (w/ an aftermarket collar from another mfr.). The camera/lens is almost perfectly centered (left to right) with the tripod apex. YMMV with other lens/camera combos, but it fits mine as well as possible, given the "limitations" of gimbals this style. It's easy to precisely adjust the tension via the large rubber covered knob, even with gloves on. Motion is silky smooth, especially when used with one of PMG's beefy ball heads for panning. It too, is machined, built and finished to PMG's superlative standards.